Part Number Hot Search : 
1209S ST202ECD 0524D NTE2325 24C25 58009 GK151 AN78N06
Product Description
Full Text Search
 

To Download MMG3012NT1-12 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  mmg3012nt1 1 rf device data freescale semiconductor, inc. mmg3012nt1 0 -- 6000 mhz, 19 db 18.5 dbm ingap hbt heterojunction bipolar transistor technology (ingap hbt) broadband high linearity amplifier the mmg3012nt1 is a general purpose amplifier that is internally input matched and internally output matched. it is designed for a broad range of class a, small--signal, high linearity, general purpose applications. it is suitable for applications with frequencies from 0 to 6000 mhz such as cellular, pcs, bwa, wll, phs, catv, vhf, uhf, umts and general small--signal rf. features ? frequency: 0 -- 6000 mhz ? p1db: 18.5 dbm @ 900 mhz ? small--signal gain: 19 db @ 900 mhz ? third order output intercept point: 34 dbm @ 900 mhz ? single 5 volt supply ? internally matched to 50 ohms ? cost--effective sot--89 surface mount package ? in tape and reel. t1 suffix = 1000 units, 12 mm tape width, 7 inch reel. 1 2 3 case 1514--02, style 1 sot--89 plastic table 1. typical performance (1) characteristic symbol 900 mhz 2140 mhz 3500 mhz unit small--signal gain (s21) g p 19 15.8 13.4 db input return loss (s11) irl -- 1 8 -- 2 0 -- 1 7 db output return loss (s22) orl -- 1 8 -- 1 2 -- 1 6 db power output @1db compression p1db 18.5 19 18 dbm third order output intercept point oip3 34 32 31 dbm 1. v cc =5vdc,t a =25 c, 50 ohm system. table 2. maximum ratings rating symbol value unit supply voltage v cc 7 v supply current i cc 300 ma rf input power p in 25 dbm storage temperature range t stg --65 to +150 c junction temperature (2) t j 150 c 2. for reliable operation, the junction temperature should not exceed 150 c. table 3. thermal characteristics characteristic symbol value (3) unit thermal resistance, junction to case case temperature 88 c, 5 vdc, 70 ma, no rf applied r jc 85 c/w 3. refer to an1955, thermal measurement methodology of rf power amplifiers. go to http://www.freescale.com/rf . select documentation/application notes -- an1955. document number: mmg3012nt1 rev. 7, 4/2012 freescale semiconductor technical data ? freescale semiconductor, inc., 2005--2008, 2012. a ll rights reserved.
2 rf device data freescale semiconductor, inc. mmg3012nt1 table 4. electrical characteristics (v cc = 5 vdc, 900 mhz, t a =25 c, 50 ohm system, in freescale application circuit) characteristic symbol min typ max unit small--signal gain (s21) g p 17.5 19 ? db input return loss (s11) irl ? -- 1 8 ? db output return loss (s22) orl ? -- 1 8 ? db power output @ 1db compression p1db ? 18.5 ? dbm third order output intercept point oip3 ? 34 ? dbm noise figure nf ? 3.8 ? db supply current (1) i cc 58 70 82 ma supply voltage (1) v cc ? 5 ? v 1. for reliable operation, the juncti on temperature should not exceed 150 c.
mmg3012nt1 3 rf device data freescale semiconductor, inc. table 5. functional pin description pin number pin function 1 rf in 2 ground 3 rf out /dc supply table 6. esd protection characteristics test methodology class human body model (per jesd 22--a114) 1a machine model (per eia/jesd 22--a115) a charge device model (per jesd 22--c101) iv table 7. moisture sensitivity level test methodology rating package peak temperature unit per jesd 22--a113, ipc/jedec j--std--020 1 260 c figure 1. functional diagram 3 2 1 2
4 rf device data freescale semiconductor, inc. mmg3012nt1 50 ohm typical characteristics v cc =5vdc 10 25 0 t c =85 c f, frequency (ghz) figure 2. small--signal gain (s21) versus frequency 20 15 1234 g p , small--signal gain (db) 25 c -- 4 0 c 4 -- 4 0 0 0 s22 f, frequency (ghz) figure 3. input/output return loss versus frequency s11 -- 1 0 -- 2 0 -- 3 0 123 s11, s22 (db) 20 7 21 10 p out , output power (dbm) figure 4. small--signal gain versus output power 19 17 15 13 11 12 14 9 3.5 3 2.5 2 1.5 1 0.5 13 20 19 18 16 14 f, frequency (ghz) figure 5. p1db versus frequency p1db, 1 db compression point (dbm) 17 15 5.4 0 100 4 v cc , collector voltage (v) figure 6. collector current versus collector voltage 80 60 20 4.2 5 5.2 i cc , collector current (ma) 40 4.4 4.6 4.8 4 21 36 0 f, frequency (ghz) figure 7. third order output intercept point versus frequency 33 30 27 24 123 oip3, third order output intercept point (dbm) 18 16 g p , small--signal gain (db) v cc =5vdc 900 mhz 2140 mhz 1960 mhz 2600 mhz 3500 mhz v cc =5vdc v cc =5vdc v cc =5vdc 1 mhz tone spacing
mmg3012nt1 5 rf device data freescale semiconductor, inc. 50 ohm typical characteristics 21 36 4.9 v cc , collector voltage (v) figure 8. third order output intercept point versus collector voltage 33 30 27 24 oip3, third order output intercept point (dbm) 4.95 5 5.1 5.05 f = 900 mhz 1 mhz tone spacing 100 -- 4 0 -- 2 0 0 2 0 4 0 6 0 8 0 28 35 t, temperature ( _ c) figure 9. third order output intercept point versus case temperature 33 32 31 30 oip3, third order output intercept point (dbm) 29 figure 10. third order intermodulation distortion versus output power p out , output power (dbm) imd, third order intermodulation d istortion (dbc) 036 9 12 -- 8 0 -- 3 0 -- 5 0 -- 6 0 -- 7 0 -- 4 0 150 10 3 10 5 120 figure 11. mttf versus junction temperature 10 4 125 130 135 140 145 t j , junction temperature ( c) note: the mttf is calculated with v cc =5vdc,i cc =70ma mttf (years) 4 0 8 0 f, frequency (ghz) figure 12. noise figure versus frequency 6 4 2 123 nf, noise figure (db) -- 7 0 -- 2 0 2 p out , output power (dbm) figure 13. single--carrier w--cdma adjacent channel power ratio versus output power -- 3 0 -- 4 0 -- 5 0 -- 6 0 12 10 8 4 acpr, adjacent channel power ratio (dbc) 14 16 34 6 v cc =5vdc f = 900 mhz 1 mhz tone spacing v cc =5vdc f = 2140 mhz single--carrier w--cdma, 3.84 mhz channel bandwidth input signal par = 8.5 d b @ 0.01% pr obabilit y( ccdf) 15 v cc =5vdc f = 900 mhz 1 mhz tone spacing v cc =5vdc
6 rf device data freescale semiconductor, inc. mmg3012nt1 50 ohm application circuit: 40--300 mhz v cc =5vdc figure 14. 50 ohm test circuit schematic rf output rf input v supply c3 c4 z1 z2 c1 z5 c2 r1 l1 v cc z4 z3 dut figure 15. s21, s11 and s22 versus frequency -- 4 0 30 0 f, frequency (mhz) s22 100 300 400 500 20 10 0 -- 1 0 -- 2 0 -- 3 0 figure 16. 50 ohm test circuit component layout c1 l1 c2 r1 c4 c3 z1, z5 0.347 x 0.058 microstrip z2 0.575 x 0.058 microstrip z3 0.172 x 0.058 microstrip z4 0.403 x 0.058 microstrip pcb getek grade ml200c, 0.031 , r =4.1 s21, s11, s22 (db) s21 s11 200 mmg30xx rev 2 table 8. 50 ohm test circuit component designations and values part description part number manufacturer c1, c2, c3 0.01 f chip capacitors c0603c103j5rac kemet c4 1000 pf chip capacitor c0603c102j5rac kemet l1 470 nh chip inductor bk2125hm471--t taiyo yuden r1 0 chip resistor erj3gey0r00v panasonic
mmg3012nt1 7 rf device data freescale semiconductor, inc. 50 ohm application circuit: 300--3600 mhz figure 17. 50 ohm test circuit schematic rf output rf input v supply c3 c4 z1 z2 c1 z5 c2 r1 l1 v cc z4 z3 dut figure 18. s21, s11 and s22 versus frequency -- 3 0 30 f, frequency (mhz) s22 800 20 10 0 -- 1 0 -- 2 0 figure 19. 50 ohm test circuit component layout c1 l1 c2 r1 c4 c3 z1, z5 0.347 x 0.058 microstrip z2 0.575 x 0.058 microstrip z3 0.172 x 0.058 microstrip z4 0.403 x 0.058 microstrip pcb getek grade ml200c, 0.031 , r =4.1 s21, s11, s22 (db) s21 s11 1300 300 1800 2300 2800 3300 3800 mmg30xx rev 2 v cc =5vdc table 9. 50 ohm test circuit component designations and values part description part number manufacturer c1, c2 150 pf chip capacitors c0603c151j5rac kemet c3 0.01 f chip capacitor c0603c103j5rac kemet c4 1000 pf chip capacitor c0603c102j5rac kemet l1 56 nh chip inductor hk160856nj--t taiyo yuden r1 0 chip resistor erj3gey0r00v panasonic
8 rf device data freescale semiconductor, inc. mmg3012nt1 50 ohm typical characteristics table 10. common emitter s--parameters (v cc =5vdc,t a =25 c, 50 ohm system) f mhz s 11 s 21 s 12 s 22 |s 11 | ? |s 21 | ? |s 12 | ? |s 22 | ? 100 0.09174 174.872 10.24140 174.57 0.07096 0.256 0.02426 --90.895 150 0.09324 173.141 10.19244 171.29 0.07214 --0.171 0.03097 --92.768 200 0.09550 172.602 10.14549 168.278 0.07255 --0.477 0.03654 --94.818 250 0.09721 171.41 10.09679 165.627 0.07316 --0.245 0.04935 --96.31 300 0.09703 170.357 10.03727 162.828 0.07333 --0.227 0.06092 --98.961 350 0.09452 169.626 9.99063 159.887 0.07362 --0.511 0.06932 --101.516 400 0.09430 168.366 9.92113 157.15 0.07387 --0.509 0.08063 --104.01 450 0.09343 167.117 9.84672 154.424 0.07402 --0.582 0.09043 --106.263 500 0.09237 166.034 9.77362 151.64 0.07435 --0.77 0.09911 --108.791 550 0.09271 164.864 9.68901 148.973 0.07457 --0.953 0.10788 --111.052 600 0.09245 163.824 9.60244 146.3 0.07487 --0.984 0.11655 --113.69 650 0.09228 162.689 9.51098 143.642 0.07531 --1.158 0.12425 --116.435 700 0.09283 161.228 9.41347 141.059 0.07577 --1.362 0.13246 --119.102 750 0.09352 159.955 9.31713 138.481 0.07608 --1.566 0.13942 --121.839 800 0.09460 158.511 9.21226 135.934 0.07652 --1.748 0.14612 --124.764 850 0.09591 157.224 9.10650 133.403 0.07698 --1.988 0.15280 --127.579 900 0.09731 155.828 9.00381 130.913 0.07747 --2.17 0.15946 --130.497 950 0.09918 154.356 8.89589 128.468 0.07786 --2.552 0.16560 --133.648 1000 0.10165 153.21 8.79066 126.065 0.07831 --2.748 0.17180 --136.717 1050 0.10456 151.519 8.67809 123.674 0.07892 --3.106 0.17724 --139.644 1100 0.10530 150.349 8.55853 121.296 0.07939 --3.413 0.18362 --142.827 1150 0.10595 149.493 8.43942 118.934 0.07997 --3.734 0.18945 --146.154 1200 0.10816 148.216 8.32401 116.631 0.08032 --4.033 0.19501 --149.409 1250 0.11046 147.031 8.21004 114.349 0.08086 --4.47 0.20058 --152.438 1300 0.11249 145.868 8.10074 112.14 0.08142 --4.792 0.20635 --155.584 1350 0.11403 144.558 7.98739 109.93 0.08202 --5.279 0.21190 --158.664 1400 0.11488 143.211 7.87293 107.781 0.08247 --5.657 0.21733 --161.631 1450 0.11602 142.244 7.75891 105.625 0.08302 --6.021 0.22271 --164.745 1500 0.11686 136.948 7.66911 103.599 0.08384 --6.437 0.23416 --166.394 1550 0.11834 134.929 7.55873 101.565 0.08447 --6.947 0.23853 --169.432 1600 0.12187 132.851 7.45808 99.538 0.08501 --7.329 0.24236 --172.577 1650 0.12645 130.925 7.35252 97.533 0.08565 --7.818 0.24526 --175.475 1700 0.13047 129.243 7.26057 95.548 0.08616 --8.268 0.24807 --178.453 1750 0.13472 127.648 7.16564 93.586 0.08673 --8.83 0.25113 178.712 1800 0.13990 126.06 7.06852 91.625 0.08733 --9.205 0.25379 175.901 1850 0.14563 124.504 6.96617 89.685 0.08792 --9.856 0.25623 173.194 1900 0.15160 122.941 6.86978 87.806 0.08860 --10.316 0.25716 170.619 1950 0.15702 121.556 6.77908 85.927 0.08917 --10.882 0.25848 168.384 2000 0.16308 120.247 6.68747 84.024 0.08980 --11.465 0.25937 166.234 2050 0.16757 118.779 6.60108 82.171 0.09037 --12.048 0.26021 164.169 2100 0.17315 117.547 6.51391 80.255 0.09093 --12.637 0.26130 162.354 2150 0.17857 116.463 6.42737 78.424 0.09154 --13.316 0.26314 160.699 2200 0.18449 115.174 6.33611 76.56 0.09210 --13.944 0.26471 159.323 2250 0.18892 113.697 6.24887 74.732 0.09280 --14.673 0.26627 157.768 (continued)
mmg3012nt1 9 rf device data freescale semiconductor, inc. 50 ohm typical characteristics table 10. common emitter s--parameters (v cc =5vdc,t a =25 c, 50 ohm system) (continued) f mhz s 11 s 21 s 12 s 22 |s 11 | ? |s 21 | ? |s 12 | ? |s 22 | ? 2300 0.19385 112.219 6.16340 72.929 0.09326 --15.366 0.26829 156.541 2350 0.19754 110.678 6.07930 71.134 0.09383 --16.084 0.27135 155.373 2400 0.20084 109.125 5.99646 69.327 0.09424 --16.717 0.27492 154.124 2450 0.20423 107.523 5.91022 67.546 0.09462 --17.459 0.27881 153.075 2500 0.20717 105.937 5.82783 65.858 0.09514 --18.149 0.28300 151.824 2550 0.20983 104.482 5.75180 64.078 0.09561 --18.867 0.28750 150.28 2600 0.21214 102.92 5.67379 62.378 0.09610 --19.566 0.29276 148.947 2650 0.21446 101.252 5.59418 60.667 0.09647 --20.335 0.29839 147.403 2700 0.21638 99.767 5.51853 58.949 0.09688 --21.012 0.30389 145.776 2750 0.21837 98.143 5.44472 57.276 0.09737 --21.79 0.30941 143.933 2800 0.22001 96.523 5.37675 55.629 0.09779 --22.573 0.31537 142.001 2850 0.22117 95.017 5.30584 53.932 0.09840 --23.199 0.32118 140.215 2900 0.22351 93.331 5.24121 52.348 0.09877 --24.027 0.32764 138.273 2950 0.22552 91.634 5.17536 50.712 0.09912 --24.843 0.33369 136.168 3000 0.22752 90.219 5.11494 49.089 0.09981 --25.546 0.34034 134.188 3050 0.23097 88.535 5.05825 47.462 0.10036 --26.365 0.34528 132.091 3100 0.23369 87.054 4.99713 45.82 0.10085 --27.171 0.35126 129.624 3150 0.23656 85.789 4.94222 44.188 0.10141 --27.968 0.35690 127.421 3200 0.23989 84.265 4.88930 42.551 0.10188 --28.842 0.36188 125.127 3250 0.24360 82.93 4.83457 40.954 0.10239 --29.629 0.36735 122.986 3300 0.24688 81.534 4.78423 39.327 0.10292 --30.452 0.37180 120.634 3350 0.25052 80.161 4.73023 37.654 0.10350 --31.434 0.37649 118.449 3400 0.25455 78.818 4.68010 36.023 0.10402 --32.349 0.38152 116.317 3450 0.25901 77.562 4.63102 34.476 0.10446 --33.239 0.38553 114.07 3500 0.26341 76.264 4.58330 32.823 0.10504 --34.166 0.39006 112.169 3550 0.26813 74.959 4.53327 31.168 0.10524 --35.066 0.39457 110.035 3600 0.27237 73.713 4.48601 29.586 0.10576 --36.008 0.39878 107.887
10 rf device data freescale semiconductor, inc. mmg3012nt1 1.7 5.33 3.48 0.58 1.27 0.86 3.86 0.64 7.62 2.49 2.54 1.27 0.305 diameter figure 20. recommended mounting configuration notes: 1. thermal and rf grounding considerations should be used in pcb layout design. 2. depending on pcb design rules, as many vias as possible should be placed on the landing pattern. 3. if vias cannot be placed on the landing pattern, then as many vias as possible should be placed as close to the landing pattern as possible for optimal thermal and rf performance. 4. recommended via pattern shown has 0.381 x 0.762 mm pitch. recommended solder stencil
mmg3012nt1 11 rf device data freescale semiconductor, inc. package dimensions
12 rf device data freescale semiconductor, inc. mmg3012nt1
mmg3012nt1 13 rf device data freescale semiconductor, inc.
14 rf device data freescale semiconductor, inc. mmg3012nt1 product documentation, software and tools refer to the following documents, software and tools to aid your design process. application notes ? an1955: thermal measurement methodology of rf power amplifiers ? an3100: general purpose amplifier and mmic biasing software ? .s2p file development tools ? printed circuit boards for software and tools, do a part number search at http://www.fr eescale.com, and select the ?part number? link. go to the software & tools tab on the part?s product summary page to download the respective tool. revision history the following table summarizes revisions to this document. revision date description 3 mar. 2007 ? corrected and updated part numbers in tables 8 and 9, component designations and values, to rohs compliant part numbers, p. 6, 7 4 july 2007 ? replaced case outline 1514--01 with 1514--02, issue d, p. 1, 11--13. case updated to add missing dimension for pin 1 and pin 3. 5 mar. 2008 ? removed footnote 2, continuous voltage and current applied to device, from table 2, maximum ratings, p. 1 ? corrected fig. 13, single--carrier w--cdma adjacent channel power ratio versus output power y--axis (acpr) unit of measure to dbc, p. 5 ? corrected s--parameter table frequency column label to read ?mhz? versus ?ghz? and corrected frequency values from ghz to mhz, p. 8, 9 6 feb. 2012 ? corrected temperature at which thetajc is measured from 25 cto88 c and added ?no rf applied? to thermal characteristics table to indicate that ther mal characterization is performed under dc test with no rf signal applied, p. 1 ? table 6, esd protection characte rization, removed the word ?minimum? after the esd class rating. esd ratings are characterized during new product dev elopment but are not 100% tested during production. esd ratings provided in the data sheet are intended to be used as a guideline when handling esd sensitive devices, p. 3 ? removed i cc bias callout from applicable graphs and tabl e 10, common emitter s--parameters heading as bias is not a controlled value, p. 4--9 ? added .s2p file availability to product software and printed circuit boards to development tools, p. 14 7 apr. 2012 ? table 1, maximum ratings, increased input power from 10 dbm to 25 dbm to reflect the true capability of the device, p. 1
mmg3012nt1 15 rf device data freescale semiconductor, inc. information in this document is provided solely to enable system and software implementers to use freescale semiconductor products. there are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. freescale semiconductor reserves the right to make changes without further notice to any products herein. freescale semiconductor makes no warranty, representation or guarantee regar ding the suitab ility of its products for any particula r purpose, nor does freescale semiconductor assu me any liability ari sing out of the app lication or use of any product or circuit, and specifically discl aims any and all liability, including without limitation consequential or incidental damages. ?typical? parameters that may be provided in freescale semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals?, must be validated for each customer application by customer?s technical experts. freescale semiconductor does not convey any license under its patent rights nor the rights of others. freescale semiconductor products are not designed, intended, or authorized for use as components in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the freescale semiconductor product could create a situation where personal injury or death may occur. should buyer purchase or use freescale semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold freescale semiconductor and its officers, employees, subs idiaries, affiliate s, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that freescale semiconductor was negligent regarding the design or manufacture of the part. freescale t and the freescale logo are trademarks of freescale semiconductor, inc. all other product or service names are the property of their respective owners. ? freescale semiconductor, inc. 2005--2008, 2012. all rights reserved. how to reach us: home page: freescale.com web support: freescale.com/support document number: mmg3012nt1 rev. 7, 4/2012


▲Up To Search▲   

 
Price & Availability of MMG3012NT1-12

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X